Can a DPF Cleaning Machine Be Used on Trucks and Buses?

DPF Cleaning Machine

A DPF (Diesel Particulate Filter) is a device mounted on the exhaust system of a truck or bus that captures soot, dust and ash. If left unchecked, soot and ash can build up in the filter, causing it to become blocked.

This can cause the engine to not run efficiently. It can also result in costly repairs to the engine.

Soot and ash that dpf cleaning machine up in the filter can reduce fuel economy by up to 50%. It also can prevent the filter from functioning at its best.

Can a DPF Cleaning Machine Be Used on Trucks and Buses?

Fortunately, there are several ways to clean the filter. The most common methods include hydrodynamic cleaning and thermal (bake and blow) cleaning.

The hydrodynamic method uses a combination of turbulent water flow and high air pressure to remove soot, ash and other particles from the DPF.

For this reason, the hydrodynamic method has become the most popular way to restore filters to their original efficiency.

However, this process is not always effective and can leave some filters clogged or dirty. This is why it is important to have the right cleaning machine for your needs.

A carbon cleaning machine is a sophisticated piece of equipment, and it needs to be cleaned regularly in order to maintain its functionality. Usually, diesel particulate filters are required to be cleaned at certain intervals according to their duty cycle and manufacturers recommendations.

DPFs for heavy-duty construction industry fleets are recommended to be cleaned every 4,000 hours while DPFs for medium-duty trucks and buses are typically needed to be cleaned once per 75,000 miles. It is also important to note that DPFs are prone to clogging and can be difficult to repair.

The diesel particulate filter is a very sensitive and delicate component of the vehicle and should not be cleaned without professional care. Using an incorrect method or not removing a clogged DPF can damage the filter and cost you a significant amount of money to replace it.

Therefore, if you want to make sure your diesel particulate filter is working at its best and is not damaged, it is vital that you find the right cleaning machine for your fleet. At Filtertherm, we have a wide range of DPF cleaning machines and equipment for all sizes of fleets.

One of the most popular models we carry is our FSX CatBlaster JR. This DPF cleaning machine is specifically designed for small & medium shops and can be operated with minimal shop space.

It is a complete DPF cleaning and drying machine with a stainless steel water pump, air compressor, large flow exhaust fan, PLC touch screen real time display of aire pump pressure, water pump pressure and cleaning time.

Our DPF cleaning machine can clean and dry most DPFs within 20 minutes of operation, which is very fast and efficient. It can also handle odd-shaped light-duty and off-road DPFs, ensuring they are ready for service in no time at all.

A DPF can be damaged by low temperature, engine problems, if it is exposed to coolant or oil, and if it is dropped. These factors can cause the ceramic structure to crack, sinter or melt and can lead to the filter becoming uncleanable.